Figure cable hook cable hook-kind product introduction and technical parameters a, coal mine power cables hanging and protection of cold stamping cable hook (hereinafter referred to as the cable hook). 1, cold stamping cable hook the cable using a device can be hung from the processing of flat steel Q235 with Die, arranged with one or more curved hooks and fixing holes in the wall composition, punching the wall fixed. 2 Structure: cold stamping style. DLG80/50/35/20 3, conventional models: DLG80-50/5, DLG55-40/4, DLG35-35/4, DLG10-30/3 DLG15-30/3 DLG100-50/5 4, cable hook Model Code named mainly by product name, code and improve the composition of the main parameters. Illustrated as follows: DLG diameter --- hook diameter / width model named Example: DLG55-40/4- hook diameter of 55mm, width 40mm plate 4mm Second, the process requires a basic cable hook shape and size should be consistent with the approved drawings and technical documents specified. 2, in addition to the red section, the cable hook surface condition requirements are consistent with those used in the sheet metal. In the forming process to allow a slight stretch lines and small surface irregularities. 3 by cutting or punching the cable hook burr height allowed by "stamping burr height" requirement. Third, the use requires an ambient temperature of -30 ~ +40 ℃; 2 using air environment does not contain corrosive ingredients acid and alkali. 3 reliability requirements are generally used under conditions of normal use for 10 years. Cable hook surface should be flat and smooth, without glitches, curling, cracking and other phenomena; rust treatment should be carried out before the galvanized coating should be uniform, complete, and shall not be tainted plating, hanging tumor and so on. Fourth, packaging commonly used wire cable hook bundled package, if necessary, can gate boxes. Cable hook should meet the waterway transport, land transport and loading requirements.